Windows discussions and local services.
Discussion activity
Topics and replies this member has contributed.
RE: Do DIY glass repair kits actually work or just a temporary fix?
That’s a fair take. I’ve patched plenty of little chips for folks and, like you said, if you get to them quick and they’re not on the edge, those kits can surprise you. The trick is patience - making sure the resin reall...
RE: Blackout curtains vs window film for beating the summer heat?
I see this a lot with blackout curtains, especially if they’re right up against the glass. They block light but trap heat, so unless there’s some airflow, you just end up with a hot pocket of air. What I usually suggest ...
RE: Tried out black window trim - totally changed my curb appeal
Bleed-through over old oil-based paint is always a pain - you're not alone there. I run into that a lot, especially in homes built before the '80s. Two coats of primer is pretty much my standard now whenever I'm covering...
RE: Ultrex fiberglass or vinyl windows - what’s the real difference?
I hear you about the wallet pain - fiberglass isn’t cheap. I’ve swapped out plenty of vinyl and fiberglass windows for clients, and honestly, unless you’re dealing with serious temperature swings or a lot of direct sun, ...
RE: Keeping Windows in Good Shape - What Actually Works Long-Term?
That’s a solid rundown. I’ve seen folks try to layer on every fix at once - usually ends up with windows you can’t budge and a mess to clean up come spring. I’m with you on the bronze weatherstripping; it’s a pain to cut...
RE: Swapping out old window handles - worth it for the style boost?
Honestly, swapping handles can look sharp, but if the window itself isn’t sealing right, you’ll still end up with that “indoor camping” vibe. I usually tell folks: after you swap the handles, check for play or wobble, th...
RE: Dealing with leftover panes after a window upgrade
That’s a solid approach. I’ve seen way too many folks hang onto every pane thinking they’ll use them “one day” - never happens. Salvage yards are a good call, and you’re right about code on greenhouses... learned that th...
RE: Turning old windows into a cool wall display - my favorite trick yet
Toggle bolts are a solid choice for plaster, especially when you’re not sure what’s lurking behind that wall. I’ve patched up my share of Swiss cheese plaster, and honestly, a couple of small toggle holes don’t usually c...
RE: Why do my smart window sensors keep disconnecting?
Those old plaster and mesh lath walls are brutal for any wireless signal - been there plenty of times on jobs. Zigbee’s mesh is usually solid, but like you said, sometimes it just hits a wall (literally). I’ve had mixed ...
RE: Windows that survive thin air and chilly temps
I've had mixed results with sealing tape too - it's pretty hit-or-miss depending on the brand and prep work. If you ever give it another shot, try wiping down the window frame with rubbing alcohol first to remove dust or...