Windows discussions and local services.
How worried should I be about lead paint when swapping out old windows?
Old houses just have their own rules, don’t they?
Seriously, it’s like they’re trying to keep you on your toes. I did the whole “mist everything and fan in the window” dance too, but I still found dust in places I swear I didn’t even go near. One thing I’d add - if you’ve got baseboard heaters, tape those up tight. Learned that the hard way… dust city for weeks.
- I get the whole taping-up-everything approach, but I’m not totally convinced it always works, especially with older houses where the dust just seems to sneak out anyway.
- I’ve read that lead dust is super fine and can end up in places you wouldn’t expect, even if you’re careful about sealing off rooms and taping vents. Like, I did a small patch job in my 1920s place and still found white dust on top of a closet shelf weeks later.
- The “mist and fan” method is good for regular dust, but with lead paint it might not be enough. EPA guidelines say you should use plastic sheeting on floors and furniture, and even have a HEPA vacuum on hand. Not everyone has that stuff, though.
- About baseboard heaters: I get why you’d tape them up, but isn’t there a risk of trapping dust inside? I tried that once and when I finally pulled the tape off, it felt like all the dust just dumped out at once. Maybe removing the covers and vacuuming inside first would help?
- One thing I’m still confused about - does it really matter if the windows are original or replaced in the ‘80s? My neighbor said anything before 1978 is risky for lead paint, but what about the window frames themselves?
- For me, the real challenge was keeping pets out of the room. My cat somehow got in during cleanup and tracked white paw prints everywhere...
- Overall, I’d say sealing things up helps but isn’t foolproof. If you’re really worried about lead (especially with kids around), maybe professional help is worth considering - even if it’s just for advice.
- Anyone else ever try those disposable sticky mats by the door? They’re supposed to catch dust from your shoes but mine just turned into a fur magnet.
Not saying don’t tape stuff up - just maybe don’t expect it to catch every speck.
If your windows were swapped out in the ‘80s, there’s still a chance the trim or sill has old lead paint, especially if nobody stripped it back then. I did a window job in my 1940s place and the original frames were caked with ancient layers. Taping helps, but yeah, lead dust is sneaky. I’d say if you’re not sure about the paint history, treat it like it’s risky. HEPA vacs are clutch if you can borrow one, but wet-wiping after is also key. Sticky mats? Mine just collected cat hair and didn’t do much for dust, honestly.
Sticky mats? Mine just collected cat hair and didn’t do much for dust, honestly.
That’s funny, I had the same issue - those mats ended up being more of a pet hair trap than anything else. I always wondered how much they actually help with lead dust, since the particles are so fine. Maybe if you’re doing a *huge* renovation and tracking stuff in and out all day, but for a window swap, I’m not convinced.
I’m curious - did you ever try one of those instant lead test swabs on your trim or sills? I grabbed a pack just to get a quick read before demo, and it was kind of reassuring (though I know they’re not 100% foolproof). Makes me wonder if it’s worth doing that before going full-on with the HEPA setup and all the taping. Or is it better to just assume there’s lead and go overboard with precautions?
Also, for anyone who’s done this - how paranoid do you really need to be about cleaning up after? Like, is wet-wiping once enough, or do you need to keep at it for days? I’ve heard some folks say you should toss any rags you use right away, but I usually just rinse them out... Not sure if that’s actually risky or just overkill.
One thing I did notice - when I was stripping paint off my old door frames, the dust got everywhere, even with plastic sheeting taped up. It made me question whether negative air machines or those box fan setups actually make a big difference, or if it’s mostly about being methodical with cleanup.
Has anyone found a method that really works for containing the mess? Or is it just inevitable with these old houses?
- Sticky mats = cat hair magnets at my place too. Maybe they work for construction crews, but with pets? Not so much.
- I did the lead swab thing before demo - felt better seeing a negative, but yeah, not exactly lab-grade science.
- For cleanup, I go overboard: wet-wipe, vacuum with HEPA, then wipe again. Tossing rags seems wasteful, but I do use old towels I don’t care about.
- Tried the box fan in the window trick... helped a bit, but dust still found its way into weird corners. Old houses just love to share their “character,” I guess.
- Honestly, being methodical with plastic and cleaning is what’s made the biggest difference for me. Never totally perfect, though - just less chaos.
Tried the box fan in the window trick... helped a bit, but dust still found its way into weird corners. Old houses just love to share their “character,” I guess.
That’s the thing with older homes - no matter how much plastic you hang or how careful you are, dust finds a way. I’ve seen lead dust settle behind trim and under floorboards even with HEPA vacuums running. Swab tests are fine for peace of mind, but yeah, they’ll never match a real lab test.
I’m curious - did you seal off the entire room, or just the immediate work zone? Full containment (taping plastic floor to ceiling, zipper doors, etc.) usually makes a noticeable difference in my experience, especially if you’re popping out old windows. It’s a hassle, but less cleanup after.
Also, when you’re tossing rags... are you double-bagging them before disposal? Some local codes require it if there’s even a chance of lead. Just wondering how strict your area is about that.
I swear, old houses are like dust-generating machines - no matter what you do, there’s always a little surprise waiting behind the next baseboard. I tried the full plastic cocoon once (zipper door and all), and it definitely helped, but I still found dust in the weirdest places months later. Honestly, the double-bagging rule caught me off guard - my city’s not strict, but I started doing it anyway just in case. Out of curiosity, have you noticed any difference in cleanup when you use negative air pressure, or does it just make the neighbors look at you funny?
I tried the full plastic cocoon once (zipper door and all), and it definitely helped, but I still found dust in the weirdest places months later. Honestly, the double-bagging rule caught me off gua...
I’ve done the negative air thing a couple times - set up a box fan in the window with plastic around it. It did help keep the dust from spreading, but honestly, it sucked out all the warm air too. My wife joked the neighbors thought we were running a meth lab. Still found lead dust in weird spots months later, though. Those old houses are just impossible to seal up 100%.
That’s pretty much my experience too - no matter how careful you are, those old houses just leak dust from every crack. I’ve found that wet-wiping surfaces as you go helps a bit, and using tacky mats at the door can catch some of the dust on your shoes. The box fan trick is good for negative pressure, but yeah, it’ll freeze you out in winter. Honestly, I don’t think you can ever get it perfect, but minimizing the mess makes a difference.
I hear you about the dust - these old houses are basically sieves. Mine’s from the 1920s, and I swear, I could clean every day and still find a new layer of grime by dinner. I did the window swap a couple years back and honestly, the lead paint thing was what stressed me out most. I read all the horror stories online and started picturing clouds of toxic dust floating around the living room.
Wet-wiping definitely helps, but it’s easy to miss spots, especially behind radiators or in weird corners. I tried the tacky mats too, but my dog just ran over them like they weren’t even there, so not sure how much they helped... The negative pressure trick is genius in theory, but yeah, not ideal when it’s 15 degrees out and you’re already bundled up like the Michelin Man.
I ended up taping plastic sheets around the work area - think Dexter but way less organized - and wore a cheap respirator from the hardware store. Probably overkill, but it made me feel better. In the end, I think as long as you’re not sanding or scraping the old paint like crazy, the risk is lower than it feels. The EPA guidelines are pretty strict, but if you’re just prying out windows and cleaning as you go, you can keep things under control.
It’s never going to be spotless, but I figure some common sense goes a long way. Plus, once those new windows are in, the drafts and half the dust seem to disappear overnight. That was honestly the best part for me - less cleaning and way fewer mystery sneezes.