Windows discussions and local services.

How much time did you spend replacing your windows?

135 replies
 

Join the conversation

Share your experience or ask a follow-up question.

The thing with older homes is, you never really know what you’re getting into until you pull that first window out. I’ve worked on a lot of houses from the 1910s and 20s, and every single one has thrown me a curveball - warped jambs, oddball trim profiles, hidden water damage... it’s almost like a rite of passage. I get what you mean about the original wood, too. Even when it’s beat up, there’s a depth to it that new trim just doesn’t have. But I’ll admit, sometimes I’ve had to call it and use new casing on the less visible sides, just to keep my sanity (and the project moving).

One thing I’ve learned: if you’re trying to keep the old look, plan for at least twice as much time as you think you’ll need. Fitting old trim back around new windows is never as simple as it should be. But when it all comes together and you stand back, it’s worth every headache.


Reply
bellabarkley448

Totally get where you're coming from. The unpredictability is half the fun (and half the headache). Here’s what I’ve found:

-

“if you’re trying to keep the old look, plan for at least twice as much time as you think you’ll need.”
Couldn’t agree more. My 1928 place had me thinking a weekend project, ended up being a month of after-work sessions.
- Matching old trim is a rabbit hole. I tried to sand and reuse as much as I could, but in a couple spots, I just had to go with new stuff and stain it to blend. No shame in that.
- Warped openings and surprise rot - yep, every window. One even had a bird’s nest tucked in the weight pocket.
- Pro tip: keep a stash of wood shims and wood filler handy. I went through more than I expected.

I’d say the “worth every headache” part is spot on. There’s something satisfying about seeing those old details come back to life, even if the process is a bit of a circus.


Reply
lunabaker756

I hear you on the trim - getting it to match is almost an art form. I’ve found sometimes it’s more practical to accept a close-enough look rather than drive yourself nuts chasing perfection. The bird’s nest in the weight pocket made me laugh… I once found a stash of marbles and an old key in mine. Curious, did you end up reglazing your sashes, or did you go with all new? That step alone can eat up days if you’re restoring.


Reply

Funny you mention the stash in the weight pocket - once found a petrified mouse and a Monopoly piece. As for sashes, I usually try to save the old ones if the wood’s decent, but sometimes it’s just not worth the headache. Did you run into any glass that was too brittle to save? I’ve had panes just shatter if you look at them wrong...


Reply
maggiedancer

Had a sash from the '20s where the glass was basically held together by paint and hope - just tapping the glazing and it spiderwebbed. Ever try cutting out old putty and the whole pane just crumbles? Sometimes it’s not worth the risk, especially with wavy glass. Curious if you’ve tried reusing that stuff or just gone for new?


Reply
shadow_williams

Ever try cutting out old putty and the whole pane just crumbles?

Yeah, I’ve been there - my 1915 bungalow had a few sashes like that. I tried to save the wavy glass since it looked so cool, but the stuff was basically fused to the wood with ancient paint and wishful thinking. Ended up losing two panes just trying to get the putty out, even with a heat gun and all the patience in the world. In the end, I kept what survived for smaller projects, but for most of them, it just made more sense (energy-wise and sanity-wise) to go new. The drafts were brutal before. Still kinda miss that old glass on sunny days, though…


Reply
adamb13

I get the appeal of new windows for energy savings, but sometimes restoring the old sashes with proper weatherstripping and storm windows can actually get you pretty close to modern efficiency - without losing that wavy glass charm. It takes more time upfront, yeah, and you’ve got to be careful with the putty (I use linseed oil putty and a glazing point tool), but I’ve found the payoff is worth it if you’re into preserving character. Drafts were way down after I added interior storms, and my heating bill dropped a bit. Just another angle to consider if you’re on the fence about replacing vs. restoring.


Reply
michaelchef

I’m a big fan of squeezing every bit of efficiency out of what’s already there, but I’ll admit: when I went down the window rabbit hole a couple years ago, I ended up replacing instead of restoring. My house is a 1950s ranch, so the original windows didn’t really have that historic charm - just single-pane aluminum frames that were basically iceboxes in winter.

I spent about four weekends on the project (DIY), and yeah, it was a slog. The new double-pane units made a noticeable difference in both drafts and noise, but honestly, the cost was steep. Sometimes I wonder if I should’ve tried interior storms or just beefed up the weatherstripping first. It’s wild how much you can do with a bit of elbow grease and some patience, especially if your windows actually look good to begin with.

I get the appeal of keeping the old glass - there’s something about those imperfections you just can’t fake. For me, efficiency won out, but if I had wood sashes or wavy glass, I might’ve gone your route. Curious - did you notice any issues with condensation after adding the storms? That’s one thing I’ve heard mixed things about.


Reply

Condensation’s a tricky one. I’ve seen interior storms work wonders in some houses, but in others, especially where the original windows weren’t sealed up tight, you can get moisture trapped between the layers. Happened at my brother’s place - he went with cheap vinyl storms over 60s wood sashes and ended up with foggy glass all winter. Kind of defeats the purpose if you’re fighting mold after every cold snap. Did you notice any difference in your heating bills after swapping out the old aluminum? Sometimes the numbers don’t move as much as people expect...


Reply

That’s a common issue with storms on older wood sashes - if there’s any air leakage, you’ll get condensation between the layers, especially when temps swing. I’ve seen it plenty with cheaper vinyl storms. As for heating bills, after swapping out my own 70s aluminum sliders for double-pane units, the drop wasn’t as dramatic as I hoped - maybe 10-15% at best. Air sealing and attic insulation actually made a bigger dent. Windows help, but they’re not always the silver bullet folks expect.


Reply
jamespodcaster

I get what you’re saying about air sealing and attic insulation making a bigger difference. I’ve read that in a bunch of places too, but honestly, when we finally bit the bullet and replaced our old single-pane windows (probably original to the house, 1950s), it felt like night and day. Maybe our old ones were just that bad, but the drafts stopped and the house was way quieter. I actually noticed the furnace wasn’t kicking on as much, especially in the living room where the windows face north.

I do agree that it wasn’t some magical drop in the utility bill - definitely not enough to pay off the windows anytime soon - but I think comfort counts for something too? Plus, I swear our allergies got better after we swapped out the leaky sashes. Could be coincidence, but who knows.

Not saying everyone should rush out and replace windows, but in our case, it felt like a bigger change than just insulation alone. Maybe it depends how bad your old windows are to start with...


Reply

Took me way longer than I expected, honestly. I thought swapping out a few windows would be a weekend project - turns out, not so much. My house is from the early 60s, and those old windows were basically held in by layers of paint and stubbornness. Ended up wrestling with warped frames and finding some “surprises” in the walls (let’s just say I now know what ancient insulation looks like... and smells like).

I agree with you about the comfort difference. After I finally got them all in, it was quieter and the drafts pretty much vanished. Didn’t see a huge drop in my heating bill either, but not waking up freezing in the winter was worth it. Plus, I swear my sinuses have thanked me ever since.

If anyone’s thinking about doing it themselves, just budget more time than you think. And maybe a few extra cold ones for when you hit hour six on window number two...


Reply

Yeah, the “weekend project” optimism got me too. My place is from ‘68 and every window was its own little puzzle - old caulk, hidden nails, and frames that looked straight until you tried to fit something square into them. Took me three weekends, mostly because I kept running into weird stuff in the walls (found an old matchbook behind one, no idea why). I did notice a drop in drafts but honestly, my utility bill only budged a little. Still, the quiet and not having to tape plastic up every winter? Worth every scraped knuckle.


Reply

Three weekends sounds about right for an older house. I tried to do mine in a couple of days, but that was wishful thinking - ran into warped frames and some weird old insulation that crumbled if you looked at it wrong. Did you notice any issues with noise after? I was hoping for a bigger change on the utility bill too, but like you, it’s mostly just less drafty and quieter. Worth it, but not magic.


Reply

- Warped frames and crumbly insulation are classic old house curveballs. Always takes longer than you think.
- As for noise, most folks notice it gets quieter, but total silence is tough unless you go triple-pane or add extra soundproofing. Sometimes street noise still sneaks in around the sills if they’re not sealed tight.
- Utility bills... yeah, new windows help, but it’s rarely a dramatic drop. You’ll feel it more in comfort than in your wallet right away.
- I usually tell people: less draft, more even temps, but don’t expect miracles on the bill unless your old ones were really shot.


Reply

What takes the time depends on the job. If you’re preserving the casing, removing and refitting trim can dominate; if the opening needs adjustment or the unit takes repeated shimming, fitting and leveling can. The thread doesn’t break down the OP’s day, so there isn’t one usual bottleneck.


Reply