I’ve run into the same clarity issue after a couple summers—funny enough, I tried one of those plastic headlight restoration kits on a scrap panel just to see what’d happen. It brought back some shine, but didn’t totally clear the yellowing.
That’s been my experience too. Haven’t found a magic fix for the inside layer cloudiness, sadly. Swapping panels seems to be the only real long-term solution if you want that “like new” look. The upside is, at least the stuff’s not shattering everywhere like glass.“after two summers you can definitely see some yellowing/cloudiness on the inside”
“after two summers you can definitely see some yellowing/cloudiness on the inside”
That lines up with what I’ve seen. I tried buffing out the outside too, but once that haze gets between the layers, it’s pretty much game over. The headlight kits help a bit, but yeah, they’re not magic—especially if the cloudiness is internal.
Honestly, polycarbonate’s toughness is great (no glass shards in the garden beds after a hailstorm), but the clarity just doesn’t last. I’ve read about folks trying to inject cleaning solutions into the channels, but that sounds like more hassle than it’s worth. At this point, I’m just budgeting for new panels every few years. Not ideal, but at least they’re lighter and easier to swap than glass.
On the flip side, I had a neighbor with old single-pane glass—crystal clear after ten years, but he’s replaced three panels from baseballs and one from a branch. Pick your poison, I guess.
Yeah, that's been my experience with polycarbonate too. I put up a small greenhouse in the backyard about four years ago, went with twinwall poly panels because I didn’t want to deal with glass breakage (we get some nasty hail here). For the first year or so, they looked great—nice and clear, let in plenty of light. But by the end of the second summer, there was already that yellowish tint creeping in between the layers. Tried all sorts of “restoration” tricks—headlight restorer, gentle soap, even that trick where you run compressed air through the channels to blow out dust. Nothing really got rid of it once it was inside.
I’ve heard folks say you can seal up the ends better to keep moisture and gunk out, but I used those little channel caps and tape that came with the kit and still had trouble. Maybe if you’re in a super dry climate it’d last a bit longer, but here it just seems inevitable.
Glass is definitely clearer over time, but yeah, durability’s a pain. My neighbor’s old cold frame has glass panes from who knows when—some look almost new, others have chips or cracks from random accidents. I guess if you’re handy with cutting glass and don’t mind replacing a pane here and there, it might be worth it for the clarity alone. For me, swapping out a poly panel every few years is just easier than dealing with broken glass or worrying about safety.
One thing I did notice: when those poly panels start to haze up, plant growth really takes a dip inside. Tomatoes especially seemed to get leggy without enough sunlight coming through. That’s when I started budgeting for replacements every couple seasons. Not cheap, but less hassle than re-glazing.
If someone ever invents a truly clear, hail-proof panel that doesn’t yellow... sign me up. Until then, it’s just tradeoffs all around.
Funny, I actually went the other way and switched back to glass after getting fed up with poly panels yellowing and warping. We get hail too, but I just use some old storm windows and replace one if it cracks. It’s a pain, yeah, but honestly the clarity is way better for my peppers and starts. I do miss the lighter weight of poly, but I haven’t had to deal with that hazy look or weird algae inside the channels since. Guess it’s just picking your battles...
- Totally get where you're coming from. Glass is a pain to swap out, but you just can't beat the clarity—plants seem to love it too.
- Poly panels are lighter, sure, but that yellowing and the algae buildup in the channels drove me nuts. Tried cleaning with vinegar once... didn't really help much.
- Only thing I'd add: glass can be a hassle if you’re dealing with bigger spans or awkward angles. Sometimes it's just not practical for those weird greenhouse shapes.
- I've seen tempered glass hold up better than regular, but price starts adding up fast. Still, at least when it breaks, you know exactly what's wrong—unlike poly where the damage creeps up on you.
- In my experience, long-term clarity wins out if you can stomach the extra weight and occasional crack. Just wish hauling those old window panes around wasn't such a workout...
Dragging old glass panes around is basically my gym membership at this point. I hear you on the clarity though—my tomatoes seem to perk up under glass way more than poly. The polycarbonate looked pretty good for about a year, then it started that yellow tinge and… well, let’s just say it’s not winning any beauty contests now. Still, sometimes I wish I could just snap my fingers and have a lightweight panel when I’m up on the ladder. Guess it’s always a tradeoff, but you’re spot on: long-term, I’ll take the sore arms if it means I don’t have to fight algae every spring.
Yeah, that yellowing poly is the worst. I tried switching a couple panels out to polycarbonate a few years back, thinking it’d be a back-saver, but you nailed it—the clarity just doesn’t hold up. Mine started getting cloudy after our first hot summer and honestly, algae seemed to love it even more than the old glass.
Dragging around heavy glass is a pain (my shoulders remind me every spring), but I haven’t found anything that beats it for light transmission or cleaning. You can scrape glass clean, but poly always ends up with those little scratches that never go away. On the upside, if you’re somewhere prone to hail or falling branches, poly does take a beating better without shattering.
I guess if I ever do a full rebuild I might try double glazing with thinner glass for weight, but for now... sore arms are just part of the deal. Funny how something as simple as greenhouse panels turns into such a balancing act.
- Glass is heavy, but nothing beats it for light.
- Polycarbonate scratches up way too fast for me—can’t see through it after a couple seasons.
- I’ve had hail crack a glass panel once, but poly just dents.
- Cleaning glass is a pain, but it actually gets clean... poly always looks kinda grubby.
- My back hates the glass, but my plants love it. Guess that’s the tradeoff.
Glass is king for clarity, no question, but my back’s still mad at me from hauling those panels into place. I get the appeal of polycarbonate—it’s lighter and shrugs off hail, which is a real bonus out here where storms roll in every other week. But honestly, after two years, mine looked like someone sandpapered it. Light transmission dropped way more than I expected. Maybe if you don’t mind swapping panels more often, poly’s fine, but I’m not convinced it saves time or money in the long run.
after two years, mine looked like someone sandpapered it. Light transmission dropped way more than I expected.
Yeah, that’s the downside with poly. I’ve swapped out a few for clients and honestly, the UV just eats it up after a couple seasons. Glass is a pain to install, but I’ve seen 20-year-old panes still looking sharp—just gotta be ready for the heavy lifting. Poly’s nice on the wallet upfront, but you end up paying in sweat and replacements down the road.