“Tried plugging every draft and suddenly the windows were sweating like crazy. Ended up cracking one open just a hair most days, which kinda defeats the purpose but keeps the glass clear.”
That’s exactly what happened to me after I sealed up every little gap—felt like I traded drafts for a sauna. Honestly, it’s a balancing act. Newer windows are great, but I still need to run the bathroom fan more or crack a window just enough to avoid that “rainforest” vibe indoors. Upgrades never seem to be as straightforward as they sound, but you’re not alone in the circus.
- Dealt with the same thing after weatherstripping every window and door. At first, felt like I “won” against drafts, but then the condensation started up overnight.
- Turns out, too much sealing = nowhere for humidity to escape. Especially once you’ve got a hot shower or even just people breathing inside all day.
- Tried running the bathroom fan on a timer (30 min) after showers—helped a bit, but not a full fix.
- Cracking open the smallest window in the basement worked best for us. Just enough airflow so the glass isn’t dripping by morning, but not so much you freeze out the house.
- If anyone’s curious: 1980s split-level, original windows (double pane but leaky til I sealed them). Midwest climate—so cold/damp is a thing most winters.
- Honestly, I’d rather deal with a tiny draft than black mold on the sills… sometimes “airtight” isn’t all it’s cracked up to be.
- Not sure if there’s a perfect answer unless you go full HRV/ERV system, which is $$$ and probably overkill for my place.
Honestly, I’d rather deal with a tiny draft than black mold on the sills… sometimes “airtight” isn’t all it’s cracked up to be.
Totally agree with this. We went hard on sealing up our 70s ranch a few years back and ended up chasing condensation all winter. Even with the bathroom fan running, it never really cleared out the humidity after showers or cooking. Ended up getting a cheap hygrometer just to see what was going on—turns out our humidity was way higher than I thought. Now I just crack a window in the kitchen when things get steamy... not perfect, but better than fighting mold. Anyone ever try one of those window-mounted trickle vents? Always wondered if they're worth drilling into old wood frames for.
I’ve actually put trickle vents in two windows—one in the living room, one in the main bedroom. The house is a 60s split-level with original wood frames, so I was nervous about drilling into them. Honestly, installation wasn’t too bad, just took it slow and measured twice. The vent itself is pretty low-profile, and I barely notice it now.
As for effectiveness, it’s a mixed bag. Helps keep the condensation down if you leave it open most of the time, especially overnight. But on really windy days, there’s a bit of a draft. Not enough to freeze you out, but you notice it. Still, I’d rather deal with a slight chill than scraping mold off the sills every spring.
If your humidity’s really high, it won’t be a miracle fix, but it does seem to help balance things out. I’d probably do it again, but only on windows that are already in rough shape, just in case I messed up the frame. Definitely beats running the dehumidifier all winter.
That’s pretty much my experience with trickle vents too. I put them in after getting tired of wiping down the windows every morning. They help, but on those really gusty days, I end up shoving a towel near the frame just in case—old house problems, right? I did notice the heating bill nudged up a bit, but not as much as when I ran the dehumidifier all winter. If your windows are already drafty, might as well get some ventilation out of it.
I get where you’re coming from—
—but I’ve actually had the opposite experience in my 1920s place. I tried to just “embrace the draft” at first, but honestly, it made the living room feel like a wind tunnel some days. What worked better for me was sealing up the biggest gaps with weatherstripping, then adding trickle vents only in the rooms that really needed it. That way, I could control where fresh air comes in and keep the heat from escaping everywhere else. It took a bit of trial and error, but my heating bill’s been way more predictable since. Sometimes old houses just need a little more tinkering than we expect...If your windows are already drafty, might as well get some ventilation out of it.
That’s interesting, I hadn’t thought about adding trickle vents only in certain rooms. I’m still figuring out the sweet spot between sealing things up and not ending up with weird moisture issues. Did you notice any difference in condensation after you put the weatherstripping on? I keep getting foggy corners in the bedroom even after trying those window film kits...
- Honestly, sealing everything up tight with weatherstripping made my condensation worse at first.
- I had to backtrack and add a small vent in the closet just to get some air moving.
- Those window films help a bit, but if the room’s not breathing, corners still fog up.
- You might want to try cracking the door or running a fan on low at night—sounds basic, but it’s what finally worked for me.
- Still get a little moisture on the coldest days, but nothing like before.
Had the same issue last year—sealed up every crack, and suddenly it was like a rainforest inside.
Totally agree. I ended up running a small dehumidifier in the evenings, which made a bigger difference than I expected. Still get a little mist on the coldest mornings, but at least my socks aren’t getting soggy from the window sills anymore.“Those window films help a bit, but if the room’s not breathing, corners still fog up.”
Funny how sealing things up tight just trades one problem for another, right? I went through a similar round last winter—sealed every draft, then suddenly had condensation pooling in the weirdest spots. What worked for me was cracking a window just a hair in the bathroom after showers, plus running the dehumidifier like you mentioned. If you’ve got ceiling fans, running them on low helps move the air around too. It’s kind of a balancing act... keep the heat in, but let the house breathe a bit.