Vinyl definitely can hold its own in salty air, especially if you pair it with stainless hardware. I installed vinyl windows about 5 years back (coastal FL here), and honestly, they're still looking pretty good. The key, though, is maintenance...even vinyl needs some TLC if you're battling salt spray regularly.
One tip I'd add—make sure to rinse the windows down every now and then with fresh water. Sounds simple, but you'd be surprised how much it helps keep the salt from crusting up and eventually damaging the seals or finishes. Learned this after neglecting my first set of windows (which were aluminum...yeah, bad choice). Those things corroded faster than I could blink.
Fiberglass is tempting, though—I get why you'd go that route. It's tough stuff and can handle temperature swings a bit better than vinyl. But for most coastal climates, vinyl seems to do the trick just fine as long as you don't skimp on quality or hardware. And honestly, saving a few bucks never hurts when you're renovating—there's always another project waiting to eat up your budget anyway...
Also, totally agree on stainless hardware. It's crazy how quickly coated hinges and handles rust out near the ocean. Had a neighbor who went with "marine-grade coatings" instead of actual stainless steel...yeah, he regretted that decision within a year or two. Rust city.
Anyway, seems like either fiberglass or vinyl can work great if you've got decent quality and stay on top of basic maintenance. Just steer clear of aluminum unless you're into replacing windows every few years (ask me how I know).
"make sure to rinse the windows down every now and then with fresh water. Sounds simple, but you'd be surprised how much it helps"
This is spot-on advice. Regular rinsing really does wonders—not just for windows, but pretty much anything exposed to coastal air. I'd also suggest checking the weatherstripping periodically; salt can degrade it faster than you'd think, and compromised seals are a sneaky way to lose energy efficiency. Good call on stainless hardware too...marine-grade coatings rarely hold up like actual stainless steel does.
Good tips here. I'd add a couple quick points from experience:
- Definitely agree on weatherstripping—caught mine deteriorating way faster than expected.
- Also, silicone spray can help protect seals and hinges from salt buildup.
- Learned the hard way that "marine-grade" isn't always bulletproof... stainless steel hardware is worth the extra bucks.
Overall solid advice, wish I'd known some of this earlier.
"Learned the hard way that 'marine-grade' isn't always bulletproof..."
Yep, found this out myself. Replaced some "marine-grade" hinges after just two years—total waste. Switched to 316 stainless steel hardware and it's holding up way better. Also, vinyl or fiberglass frames seem to handle salt air better than wood or aluminum in my experience. Less maintenance hassle overall, too...
Yeah, marine-grade can be pretty misleading sometimes. Had a similar issue with some "marine-grade" fixtures on my deck—rusted out way quicker than I expected. Ended up swapping them for 316 stainless steel too, and it's been night and day difference. Good call on the vinyl and fiberglass frames; I've noticed the same thing. Wood looks great at first, but the upkeep in salty air is just brutal. Aluminum isn't much better—corrosion city after a couple seasons. Fiberglass has been solid for me so far, minimal fuss and still looks decent after a few years. Sounds like you're on the right track now though, so hopefully less headaches ahead...
"Wood looks great at first, but the upkeep in salty air is just brutal."
Yeah, learned that lesson the hard way myself. Had these gorgeous wooden frames installed thinking they'd age gracefully... nope, turned into a maintenance nightmare. Switched to fiberglass last year—so far, zero regrets and way less weekend hassle.
Fiberglass is definitely a solid choice for salty air—good call there. I'd also throw vinyl into the ring as another low-maintenance option. Had vinyl installed about five years back, after watching my neighbor struggle endlessly with his wooden frames (beautiful, but man, the peeling and repainting every season was painful to watch). Vinyl windows have held up surprisingly well—no peeling, warping, or rusting, and cleaning is pretty much just a quick hose-down a few times a year.
I was a bit skeptical at first, thinking they'd look cheap or plasticky, but honestly they've come a long way. Mine still look sharp, and the energy efficiency has been noticeably better too. Fiberglass might be slightly tougher overall, but vinyl's usually easier on the wallet if that's a factor. Either way, glad you got away from wood—life by the sea should be more relaxing than sanding and repainting window frames every other weekend...
"Fiberglass might be slightly tougher overall, but vinyl's usually easier on the wallet if that's a factor."
Good points about vinyl, though I've heard mixed things about its long-term UV resistance. Curious if anyone's noticed fading or brittleness after extended sun exposure near the coast?
I've installed plenty of vinyl windows along the coast, and honestly, results vary. Had a client near Daytona whose vinyl frames got pretty chalky and brittle after about 8 years—sun exposure was brutal there. But then again, another homeowner up in Maine has had vinyl windows for over a decade, and they're still holding up fine. Seems like quality and brand matter a lot too...so I'd say do your homework before jumping in.
"Seems like quality and brand matter a lot too...so I'd say do your homework before jumping in."
Couldn't agree more. I've seen neighbors here on the Outer Banks with vinyl windows that look rough after just a few years, while others seem fine after a decade. Definitely comes down to brand and quality—cheap vinyl won't cut it in harsh coastal conditions. Personally, I'd lean toward fiberglass or aluminum-clad wood if budget allows. Costs more upfront, but saves headaches down the road.