Fiberglass holds up better than vinyl in extreme cold, hands down. Vinyl’s fine for a lot of climates, but when you get those wild temp swings—like minus 20 at night and sunny afternoons—vinyl frames can flex and sometimes even warp a bit over the years. Fiberglass is just more stable, and it doesn’t get brittle. Costs more up front, but if you’re planning to stay put, it’s worth considering. That said, triple-pane glass is a game changer either way... makes the living room actually livable in January.
- Seen a lot of what you're describing—vinyl gets pretty stiff and can even crack if you’ve got those wild temp swings. Fiberglass definitely handles the flex better.
- Triple-pane glass is huge for comfort, but it does add weight. Sometimes folks don’t realize their old window frames might not support it without some reinforcement.
- Curious if anyone’s had issues with condensation between panes in extreme cold? I’ve run into that a few times, especially when installers cut corners on sealing.
Curious if anyone’s had issues with condensation between panes in extreme cold? I’ve run into that a few times, especially when installers cut corners on sealing.
That right there is the kicker—condensation between panes is pretty much a dealbreaker for me, and you nailed it about the install. I did a whole set of triple-pane replacements in my old cabin two winters ago, and I got lucky with a crew that really cared about their work. Zero fogging so far, and we get some wild cold snaps up here, but I’ve seen what happens when someone tries to rush that job or skimps on the tape and sealant. It’s not pretty, and you end up right back where you started, just with a lighter wallet.
I’m with you on fiberglass over vinyl, especially for mountain weather. I had a couple of vinyl sliders on the north side that got so brittle after a few years they sounded like breaking ice when I tried to open them in January. Fiberglass just shrugs off the cold and doesn’t warp or crack nearly as bad, at least in my experience. Yeah, it’s pricier, but for me, the peace of mind’s worth it.
Triple-pane is a game changer for comfort, but you’re right—weight is no joke. I learned the hard way when I tried to mount a big unit myself... let’s just say reinforcements weren’t optional. If your frames are older or you’re not sure about the structure, it’s better to overbuild than risk sagging later.
One thing I’d add—if anyone’s worried about condensation, don’t skimp on the little details like sill pans and vapor barriers. And make sure whoever installs them actually gives a rip about quality. That’s made all the difference for me.
Mountain winters are brutal, but with the right setup, you can actually enjoy watching the snow pile up from inside without shivering.
Funny you mention the weight on those triple-pane units—I’ve seen more than one homeowner underestimate that and end up with a saggy frame or a window that just doesn’t sit right. The install details are everything, like you said. I still see folks skipping sill pans or using the wrong flashing tape, then wondering why there’s water intrusion or mystery drafts later. Anyone tried those newer fiberglass windows with integrated vapor barriers? Curious if they’re actually worth the extra bucks, or just marketing fluff...
I’ve been eyeing those fiberglass windows with the built-in vapor barrier, but honestly, I’m not convinced they’re worth double the price tag. I get the idea—less chance of water sneaking in, theoretically better insulation—but I keep coming back to install quality. You can buy the fanciest window on the market, but if someone cuts corners on the flashing or skips a step, you’re still going to end up with drafts and headaches.
I replaced a few old vinyl units last winter (mid-80s ranch, pretty drafty before), and yeah, vinyl isn’t perfect—gets a little stiff in deep cold, and I’ve seen some warping over time. But for the price? Hard to beat. The fiberglass ones looked nice at the showroom, but when I asked about real-world installs in our climate, the sales guy got vague fast... always a red flag for me.
Maybe if you’ve got a super exposed spot or want to go all-in on energy savings, it makes sense. For most folks though, seems like you’d get more bang for your buck just making sure whoever installs them actually knows what they’re doing.
You can buy the fanciest window on the market, but if someone cuts corners on the flashing or skips a step, you’re still going to end up with drafts and headaches.
This is exactly what happened at my place—spent ages picking “better” windows, but one shoddy install around a tricky corner and I was chasing leaks for months. Ever try to track down a cold draft in February? Not fun. Curious if anyone’s actually seen a big difference in condensation or comfort with fiberglass over vinyl in real winter conditions? I keep hearing about it, but never met someone who swears by it in practice.
Curious if anyone’s actually seen a big difference in condensation or comfort with fiberglass over vinyl in real winter conditions?
Honestly, I’ve seen both perform well if the install’s solid. Fiberglass is supposed to be more stable with temperature swings, but in my experience, a poorly foamed gap around a vinyl window will cause more headaches than the material ever will. Have you checked for air leaks around the frame itself, not just the glass? Sometimes it’s less about what the window’s made of and more about how it’s set into the wall.
I get where you’re coming from about install being the big factor, but I’ve actually noticed some real-world differences with fiberglass in mountain winters. My cabin’s got both types—vinyl in the back bedrooms, fiberglass in the main room. The vinyl frames get noticeably colder to the touch, and I’ve seen more condensation there when it’s below zero. Even with good air sealing, fiberglass just seems to stay a bit warmer inside. Not a dealbreaker, but if you’re picky about comfort or have moisture issues, it’s worth thinking about.
I’ve noticed the same thing with condensation.
My place isn’t a cabin, but we swapped out a few old wood windows for vinyl in the upstairs bedrooms. They’re definitely chillier around the edges during cold snaps, and I get a bit of frost buildup if I forget to crack the window for airflow. Have you seen any long-term issues from that extra moisture, like mold or paint peeling? I’m always weighing if it’s worth upgrading or just living with it...“vinyl frames get noticeably colder to the touch, and I’ve seen more condensation there when it’s below zero.”
Yeah, I’ve seen some issues over time. In our last house, the vinyl windows in the basement started getting black spots in the corners after a couple winters—nothing major, but definitely mold. Some of the trim paint flaked too where condensation pooled. I think ventilation helps, but it’s tough when it’s freezing out. Have you tried running a fan or dehumidifier upstairs? That made a difference for us, though it’s a bit of a hassle.