I live in an older 1950s house near Tampa, and one thing I’ll add is about window function and how it relates to design. The original windows in my place were jalousie windows (those louvered glass slats) – very retro and actually great for ventilation, but terrible for energy efficiency and security. When we updated, we went with awning windows in the same openings. Aesthetically, it was an interesting change: from the outside, the awning windows have a more streamlined, clean look (just horizontal panes that crank out from the bottom), which actually still nods to the mid-century style of the house.
Inside, the awning windows are higher on the wall (we placed them above eye level in the bathrooms and high in the bedrooms) so they act like clerestory windows, letting light in without compromising privacy. I’ve noticed modern builds doing this too – like a band of windows up near the ceiling line to let light in. It’s a cool design trick if you have a room with high ceilings or just want daylight without a view (like in a bathroom or hallway).
So design idea: awning or clerestory windows can be both functional (for privacy and rain-proof ventilation – you can leave awnings open a bit even when it rains) and stylish, giving a continuous ribbon of light near the ceiling. It worked well for us and maintained the house’s original character better than standard sliders would have.
Wow, these responses are fantastic – thank you! I’m taking notes like crazy. I have to say, I hadn’t even thought about some of these points, like mixing window styles on different sides of the house or painting interior trim to complement the windows. Very eye-opening (pun intended!).
A quick follow-up question: what about tinted or reflective glass? I notice a lot of Florida homes (especially commercial buildings) have reflective or tinted windows to cut down on heat. Is that something any of you did or would recommend for a home? I do want to keep my home cooler and add some privacy, but I’m concerned about how a strong tint or reflective coating would look from the street (don’t want it to look like a mirror building) and from the inside (don’t want things to look too dim or greenish). Any experiences with gray or bronze tints, or those Low-E coatings in terms of appearance?
@poet45 – I went with a gray-tinted glass on our front windows for exactly those reasons (heat and daytime privacy). From the outside, our windows have a slight reflective sheen, but it’s not like a full mirror. I’d compare it to maybe how some car windows look – a little reflection but you can still see inside a bit if you’re up close. Honestly, I think it looks fine; in fact, it gives the windows a kind of uniform look from the street because you mostly see the reflections of the sky and landscaping.
From inside during the day, the tint is barely noticeable except that it cuts the glare. Colors outside look slightly cooler (like, the grass looks a tad less bright green through the tint, if I really pay attention). It actually makes the Florida sunlight more comfortable to my eyes. At night, if you have lights on inside, people can see in as usual, so we still have blinds for night time privacy. The tint doesn’t help in that scenario.
One thing: make sure any tint or Low-E glass you get is within what’s allowed by your HOA or local codes, if applicable. Some places don’t want highly reflective glass facing the street. But the gray tint we chose has been great – it’s a nice balance of reducing heat without looking too dark. And it kind of gives a sleek, slightly modern appearance to the windows, which I personally like.
We didn’t go for a specific tint, but we did get windows with a high-performance Low-E coating (low emissivity glass is pretty standard these days). In Tampa’s sun, the Low-E is almost a must for energy efficiency. A side effect of that coating is a slight tint – in our case, I notice the glass has a very faint greenish hue when I look at it from an angle outside. It’s not super obvious, but if you look for it, it’s there.
Aesthetically, it hasn’t been a problem for us. In fact, the slight tint just looks like normal glass unless you're actively comparing it to clear glass. Our neighbor’s old clear glass windows actually look more stark (and their interiors get so hot). So I’d say don’t worry about Low-E from a looks perspective; most people won’t notice the slight color. And from inside, we don’t really see any difference in the color of light. If anything, it just cuts the blinding intensity of the sun a bit.
We chose a neutral Low-E (some have a bluish or grayish cast, ours is more neutral green). If you have a chance to see samples, that’s a good idea. But practically every modern window here will have some sort of coating. In Tampa Bay, the energy savings and comfort are worth it, and it doesn’t really detract from the design in my opinion.
Jumping in here with another experience – we had our windows replaced about 6 months ago and went through ProTech Windoors (another local company). One neat design feature they provided was removable grilles. We were undecided on whether we wanted the traditional grid look or a clean look, so the salesperson showed us windows that have interior grilles you can pop in and out.
So day-to-day, we actually keep the grids out for a clear view (especially for our back patio doors and big living room window). But when we had a holiday party, I popped the grids back in on the front windows just to give the house that classic cozy look with our colonial-style decorations. It’s a small thing, but it’s nice to have the option to change the look without replacing the whole window.
Design-wise, the windows themselves (we got vinyl frames in a white finish) are pretty simple and timeless. We figured if we ever sell the house, having the grids available might appeal to a broader range of buyer tastes too. By the way, the ProTech crew was great and the pricing was competitive – but more importantly for this thread, I just loved that I didn’t have to fully commit one way or the other on grids vs no-grids!
Has anyone seen those super minimal frame windows? I visited a modern home tour in the area and one house had windows that were almost frameless – like all you saw was glass, with maybe a very thin metal outline. It gave the home a real wow factor, especially from inside, because it felt like there was almost nothing between you and the outside.
I’m curious if those are practical or available for regular homeowners. Are they steel windows or some special type? And can they be hurricane-rated? I assume you’d need some serious engineering for that. The owner mentioned something about them being custom aluminum frames that are powder-coated black and that they weren’t cheap.
I love the idea of a super clean look, but I wonder if it’s overkill for a normal house. Plus, I imagine the thinner the frame, the less insulation you might have unless it’s a high-tech material. If anyone has looked into this, I’d love to hear about it. Otherwise I might just stick to standard windows with maybe a thicker glass and slim profile, which is more in my budget!
@kathyr27 – I know exactly the look you’re talking about. Those ultra-slim frame windows are often seen in modern architecture. In many cases, they are aluminum or even steel-framed windows (steel allows for very thin frames because it's so strong). They can be made hurricane-impact, but usually by specialty manufacturers. I've looked into it out of curiosity and found that some companies do steel windows for high-end homes and yes, they cost a pretty penny.
For a more standard project, one trick to get a similar look is to use large fixed windows (picture windows) for the areas where you want that all-glass effect, and then put any required opening windows (casements or awnings, which can also have relatively clean lines) off to the side or somewhere less visible. We did a 6-foot by 6-foot fixed window in our den. The frame is still vinyl but since it doesn’t open, it has no center meeting rails or anything, so all you see is a pretty slim border and glass. It’s as close as we could get to that frameless feel without breaking the bank.
Another thing: lighter frame colors can make the frame visually recede. But if you like the black frame aesthetic (which is super nice in modern design), even standard windows in black can mimic that look of thin frames if you have a lot of glass. In short, true frameless or minimal frame windows exist, but there are budget-friendly ways to approximate the style using common window types and some smart placement.
I’m in a 1925 bungalow in Tampa, so my perspective is a bit different because I had to balance modernizing with preserving the home’s character. When we replaced our windows, we were actually required by our local historical committee to keep the original look on the front windows. That meant we needed the traditional grille pattern (in our case, six-over-one windows: six small panes in the top sash, one big pane in the bottom sash).
We ended up getting custom windows that mimicked this look. They’re actually single-hung windows with something called “simulated divided lites” – basically grids on the outside and inside of the glass with a spacer in between, so they look like old-fashioned multi-pane windows even though each sash is one piece of glass. It’s pretty convincing. We went with a wood interior so we could paint them the exact historic color, and aluminum-clad exterior for durability. Karoly Windows helped source those for us, as they carry some lines that cater to historic homes. They turned out beautiful and satisfied the historic requirements.
For the sides and back of the house, since they’re not street-visible, we had more freedom. We chose a simpler one-over-one look (no grids at all, just plain glass) to maximize light and views of our garden. Honestly, I love having the best of both worlds. From the street, the house looks like it hasn’t lost its old charm at all, but inside and in the backyard, we get to enjoy a more open, contemporary feel. So it is possible to mix traditional and modern styles even on the same house, you just have to be thoughtful about where you do it.
We’re actually building a new home in a subdivision just outside Tampa, and window design was something the builder discussed with us early on. In our case (because it’s a semi-custom build), we didn’t have endless choices but there were a couple of key design options: frame color and grid pattern. The default was white frames with no grids, which gives a very clean, modern look that appeals to many buyers. But we opted for the optional bronze exterior/white interior frame. The bronze exterior (a dark brownish color) goes really well with our home’s planned tan stucco exterior and brown roof tiles – it’s not as stark as black, but still contemporary. Inside, the frames are white, so it’s nice and neutral for our interior decor.
The builder also offered grids as an option. We noticed in the model homes that adding grids (they had a six-light pattern on upper sashes) gave a more traditional feel, which we actually didn’t want in our particular design. So we chose to go with no grids at all for a more panoramic view out of each window. Our style is leaning more transitional to modern.
One thing I’ll say: even within our fairly standardized choices, just going with that bronze frame made our house design feel a notch above the cookie-cutter look. Driving around the neighborhood, you can almost pick out who chose the upgraded window colors – it’s subtle but you notice some houses just have a little extra "pop". So, if anyone is doing a new build or even working with a builder, don’t overlook the impact a slight change in window color or style can have on the overall look.
Since a few people have mentioned dark frames like black or bronze, I wanted to share a small word of caution from my friend’s experience. She has a home in Clearwater with black aluminum window frames on a south-facing wall. In the summer sun, those frames get extremely hot to the touch. Now, it's mostly an exterior issue (no one is really touching the window frames from outside), but if you have metal frames and little kids who might grab the window sill from inside when it’s super sunny, it’s something to think about. Inside her house, the frames are painted wood so it’s fine, but the metal exterior is like a frying pan by mid-day.
With vinyl frames (which a lot of us have here), the heat build-up might be less of an issue compared to aluminum. Still, dark colors do absorb more heat. I don’t think it’s a deal-breaker – many people obviously go with dark frames and are happy (and the look is awesome). Just something to be aware of. Perhaps ask the installers how the frame material and color hold up in direct sun.
In our case, we went with a medium gray frame for a couple of windows that get intense sun, mainly because we wanted to avoid potential warping or thermal issues that could possibly happen with very dark vinyl. The gray still looks modern but likely doesn’t bake as much as pure black might. So far so good!