at least I’m not taping up plastic every winter
That hit home. Used to spend half of November fighting with that shrink film, hair dryer in one hand, cursing drafts. Swapped out the old sashes for double glazing last year—missed the charm at first, but not the frost on the inside.
Trickle vents annoy me too, honestly. Sometimes feels like I traded one draft for another, just more “official.” But you’re right about the bills. My gas usage dropped more than I expected, and the house actually holds heat now. Still get a bit of noise from outside, but nothing like those old rattlers.
Guess it’s true what you said—“maybe it’s just what you get used to.” Took a while, but now I barely notice the difference, except when I walk past my neighbor’s place and hear their windows whistling in the wind... Makes me glad for the upgrade, quirks and all.
- Had almost the same battle every winter—plastic film, tape everywhere, windows still icy. Never missed that ritual after switching to double glazing.
- Agree about the trickle vents. Ours seem to let in just enough cold to notice, but not enough to be a dealbreaker. I do wish you could actually close them fully when you want.
- The old wood frames looked great but needed repainting every few years and always had a draft, no matter what I tried.
- Heating bill dropped by about 20% after the upgrade. Didn’t expect that much, honestly. House feels less “drafty” overall, even if it’s a bit less “historic.”
- Only downside is some condensation between the panes when the temps swing fast—installer says it’s normal but still bugs me.
- Noise is way down. Used to hear every car door on the street, now it’s mostly quiet unless someone’s got a really loud muffler.
- Not sure I’d go back, even with the quirks. The comfort level’s just better, and I don’t dread winter anymore.
I get the frustration with condensation between panes. Had the same thing after installing double glazing in my 1950s place. Installer said it’s “normal,” but honestly, it usually means the seal isn’t perfect. If it’s just a little fogging that clears up, probably not a big deal, but if you’re seeing actual moisture beads or it lingers, I’d push for them to check the seals. Sometimes a minor fix with the desiccant canister inside the frame helps, but if the unit’s compromised, replacement might be the only option. Annoying, but worth it for the energy savings—I cut my gas bill by about a quarter, too. The trickle vents bug me as well; I’ve taped them off during the worst cold snaps, but you have to watch for condensation then. It’s always a tradeoff.
Had a similar run-in with condensation after we swapped out our original 1940s single panes a few years back. The installer also brushed it off, but I’m with you—persistent moisture between the panes isn’t “normal” in my book. It’s funny, because the main reason we bit the bullet on double glazing was to cut drafts and save on heating, but then the condensation started showing up that first winter. Not exactly what I’d pictured.
I do agree that a little fogging that comes and goes isn’t much to worry about, but once you start getting beads of water or it just hangs around, it’s usually a failed seal. We had two units replaced under warranty after about eighteen months. The manufacturer blamed “settling” in our old brick walls, but I suspect it’s just the luck of the draw sometimes.
“The trickle vents bug me as well; I’ve taped them off during the worst cold snaps, but you have to watch for condensation then. It’s always a tradeoff.”
That’s exactly it. I’ve gone back and forth with those vents—leave them open and you get drafts, close them and you risk damp patches in the corners. I actually tried some of those moisture absorber tubs on the sills during a particularly damp January, and it helped a bit, but wasn’t a miracle cure. The balance between energy efficiency and ventilation is trickier than I expected.
On the plus side, I did notice a real drop in our gas bill—maybe not quite 25%, but enough to make the investment feel worthwhile over time. Still, I sometimes miss being able to just open an old sash window wide and get a real breeze going. There’s always something, isn’t there?
Yeah, I totally get what you mean about missing the old sash windows—sometimes I just want to fling one open and air out the whole place, but with the new ones it’s more like “crack it an inch and hope for the best.” The condensation thing is such a pain. We had it worse in the kitchen, especially after cooking, and I swear those moisture tubs only help a little. Still, the lower gas bill is a win. Just wish there was an easy fix for the damp corners... always feels like a balancing act.
- Noticed the same thing—old windows let in drafts, but at least the air felt fresher.
- Our new double glazing keeps things warmer but the kitchen corners are always damp after dinner.
- Tried leaving the extractor on longer, but it barely helps.
- Anyone tried those window vent trickle things? Do they actually cut down on condensation, or just let in cold air?
Anyone tried those window vent trickle things? Do they actually cut down on condensation, or just let in cold air?
I’ve wondered the same thing. Put trickle vents in our lounge windows last year after we got double glazing, and honestly, they do help with the condensation. Not a miracle cure, but it’s better than before—less water running down the glass in the mornings. That said, you definitely notice a bit more chill near the vent when it’s windy out. It’s a tradeoff. The air feels less stuffy, though, and I’ll take a little draft over mould any day.
Funny thing is, our kitchen is still the worst spot for damp corners too, even with the extractor running. Maybe it’s just all the steam from cooking that gets trapped now that the house is so airtight. Sometimes I crack a window for ten minutes after dinner and that helps more than anything else. Not ideal in winter, but better than wiping up puddles.
It’s tough—old windows let in too much air, new ones not enough. Feels like there’s no perfect solution, just picking your battles.
That’s exactly the same issue I ran into—new double glazing made the place warmer, but then the condensation problem just shifted around. I put trickle vents in the bedrooms and it helped a bit, but like you said, not a magic fix. The kitchen’s always the worst for us too, especially after a big Sunday roast. Have you tried a dehumidifier in there? I’m debating if it’s worth the space and noise, or if it just ends up being another thing to plug in and forget about.
Have you tried a dehumidifier in there? I’m debating if it’s worth the space and noise, or if it just ends up being another thing to plug in and forget about.
I get where you’re coming from—dehumidifiers can be a bit of a pain, especially in a busy kitchen. I actually went a different route and installed an extractor fan with a humidity sensor. It kicks in automatically when things get steamy, which means one less thing to remember. For me, it made more of a difference than the dehumidifier ever did, and there’s no bulky unit taking up floor space. Might be worth considering if you haven’t already.
Extractor fans with sensors are handy, but honestly, if your old windows are drafty, a fan’s just a band-aid. I’ve seen folks swap to modern windows and suddenly half their moisture issues vanish. The upfront cost stings, but it’s less stuff to maintain in the long run.