I've actually done the cold frame thing with old windows, and honestly, it's worked out pretty well. I built mine about three years ago, and they're still holding up nicely—just make sure you seal the wood properly to avoid rot. Also, pro tip: angle them slightly so rainwater doesn't pool on top. Sure, they might not last forever, but for a cheap DIY solution, they're surprisingly durable and effective.
Nice job on the cold frames—I did something similar a couple years back, and it's still going strong. Good call on angling them slightly; I learned that the hard way after a heavy rainstorm left mine looking like mini swimming pools, lol. Definitely agree about sealing the wood properly too—makes a huge difference. It's pretty satisfying turning old junk into something useful, isn't it?
"It's pretty satisfying turning old junk into something useful, isn't it?"
Yeah, definitely feels good giving stuff a second life. I've got a stack of old windows from when we replaced ours last summer—thinking about trying a mini greenhouse next spring. Did you use any special hinges or just regular hardware store stuff? I'm kinda worried about durability with weather and all...
Yeah, definitely feels good giving stuff a second life.
Regular hinges from the hardware store should hold up fine if you coat them with some rust-resistant spray. I built a cold frame last year using old windows, and it's still solid. Are you planning to seal the wood frames somehow?
Are you planning to seal the wood frames somehow?
Yeah, definitely seal them if they're gonna be outside. I learned that the hard way... built a small greenhouse frame last spring and skipped sealing the wood because I figured it'd be fine. Big mistake—after just one rainy season, the wood started warping and rotting around the edges. Ended up having to redo it with some outdoor-grade sealant. Lesson learned, haha.
Sealing is definitely helpful, but have you thought about maybe using aluminum cladding or vinyl wraps instead? Wood sealants are great, don't get me wrong, but they do require periodic maintenance—especially if you're dealing with harsh weather or direct sunlight. I've seen plenty of sealed wood frames still eventually warp or crack after a few years outdoors.
A couple years back, I helped a friend repurpose some old windows into a garden shed, and we ended up using aluminum cladding around the frames. It was a bit more upfront work (and cost), but honestly, it's held up amazingly well without any noticeable deterioration. Might be worth considering if you're looking for something more long-term and low-maintenance... Have you explored any options beyond just sealing the wood?
I actually just went through something similar with some old windows I found in my garage. Thought about sealing them at first, but after chatting with a neighbor who had sealed frames warp badly after just two winters, I reconsidered. Ended up going with vinyl wraps instead—mostly because they seemed easier to manage for someone new to DIY like me. It's only been about a year, but so far they're holding up surprisingly well, even with all the rain we've had lately.
One thing I'm curious about though...does aluminum cladding handle temperature swings better than vinyl? The vinyl seems sturdy enough, but I've heard mixed things about it cracking or getting brittle over time.
Vinyl wraps were a solid choice, especially if you're new to DIY. I've seen plenty of folks have good luck with them, even in harsher climates. Aluminum cladding does tend to handle temperature swings a bit better though—it's less prone to cracking or getting brittle over time compared to vinyl. I remember working on a house a few years back where the homeowner had aluminum-clad windows installed about 15 years prior, and honestly, they still looked almost new. No warping, no cracks, nothing.
That said, vinyl has come a long way in recent years. Manufacturers have improved the formulas quite a bit, so the horror stories you hear about cracking or brittleness usually involve older products or extreme conditions. If yours are holding up well after a year of rain and temperature swings, that's already a pretty good sign they'll last you quite a while longer. Keep an eye on them during really cold snaps or heatwaves, but honestly, I wouldn't stress too much about it—sounds like you're off to a great start.
I worked on a renovation about 8 years back where the homeowner had a stack of old wooden windows lying around after we replaced them with vinyl-clad ones. Instead of tossing them, he actually turned them into cold frames for his garden beds. Pretty clever idea, honestly—just hinged the old sashes onto simple wooden boxes and created mini greenhouses. Last I heard, he's still using them every spring to get seedlings started early.
About the vinyl vs aluminum cladding discussion: you're spot-on about aluminum handling temperature swings better, but I've seen some newer vinyl products stand up surprisingly well even in climates with harsh winters and hot summers. Still, if I were doing my own house again, I'd probably lean toward aluminum-clad wood windows—they've just proven themselves over time with fewer issues in my experience. But that's just me...
That's a pretty smart way to reuse old windows. I recently bought my first home, and the previous owners left behind a couple of old wooden windows in the garage. I've been scratching my head about what to do with them, and the cold frame idea sounds pretty doable, even for someone like me who's not exactly handy.
On the aluminum vs vinyl topic, I'm still learning, but I went with vinyl-clad wood windows mainly because of budget concerns. So far, they've held up fine, but it's only been a year, so time will tell. I did notice that the vinyl frames expand and contract a bit with temperature changes, especially during cold snaps. Nothing major yet, but it does make me wonder how they'll hold up long-term.
I'm curious though—has anyone tried using old windows for indoor decor or furniture? I've seen a few Pinterest posts where people turned them into coffee tables or wall art, but not sure how practical those projects actually are. Would love to hear if anyone's actually done something like that and how it turned out...