"Wonder if anyone's tried polyurethane sealants instead—heard they're durable, but are they any easier to work with than silicone?"
Tried polyurethane recently on some south-facing windows after the caulk strips drove me nuts peeling every summer. Honestly, application felt smoother than silicone—less sticky mess—but cleanup was still a pain. Durability seems promising so far...
Honestly, application felt smoother than silicone—less sticky mess—but cleanup was still a pain.
I've used polyurethane quite a bit for window sealing jobs, and yeah, it's definitely smoother going on than silicone—doesn't drag or stick as much. But you're right about cleanup...it's a hassle if you let it dry even a little bit. Silicone's easier to scrape off glass once cured, while polyurethane tends to bond pretty stubbornly. Durability-wise though, polyurethane holds up great in harsh weather and sunlight, so I'd say the trade-off is worth it overall.
Yeah, polyurethane is definitely a beast once it sets. I remember one time I got distracted mid-job—phone call or something—and came back to find a nice thick bead of poly had already started curing on the glass. Spent the next hour scraping and cursing under my breath, trying not to scratch the window. Silicone might be stickier going on, but at least you can peel or scrape it off pretty easily once it's dry.
That said, durability-wise, poly is hard to beat. I've seen silicone start to degrade or discolor after a few years in direct sun, especially if it's a cheaper brand. Polyurethane just seems to shrug off UV rays and weather like it's nothing. If cleanup's your main concern though, you might wanna keep some mineral spirits handy—makes life way easier if you catch it early enough. Learned that lesson the hard way...
"Silicone might be stickier going on, but at least you can peel or scrape it off pretty easily once it's dry."
You know, I've actually had mixed results with silicone cleanup. Sure, it's easier to scrape off glass, but when it gets into textured surfaces or painted frames, it can leave a stubborn residue that's almost impossible to fully remove. Have you guys ever tried caulk strips? I installed some around my basement windows last year—pretty straightforward, no mess, and still holding up surprisingly well through winter and summer cycles so far...
I've had decent luck with caulk strips too, especially around my kitchen sink—no peeling or mold yet after about a year. Silicone was a pain on painted trim for me, left some annoying residue behind... lesson learned there.
"Silicone was a pain on painted trim for me, left some annoying residue behind... lesson learned there."
Yeah, silicone can be tricky on painted surfaces—been there myself. If you ever need to use silicone again, here's what I usually do: mask off the area carefully with painter's tape first, apply the silicone sparingly, smooth it quickly with a damp finger, then peel off the tape immediately before it sets. Saves a lot of hassle later on. But honestly, for windows, caulk strips have been pretty reliable and less messy in my experience.
"But honestly, for windows, caulk strips have been pretty reliable and less messy in my experience."
Caulk strips are decent for quick fixes, but I've seen them peel or lift after a couple seasons. Silicone, despite the hassle, tends to hold up better long-term. Ever had issues with strips losing adhesion over time?
I've had mixed luck with caulk strips myself. They're great for a quick fix, but after a harsh winter or two, I've noticed them starting to lift at the corners. Silicone's messier, sure, but once it's set, it stays put for years...worth the extra hassle imo.
Yeah, silicone's definitely the way to go if you're looking for longevity. I tried those caulk strips a couple years back when we first moved into our place—seemed like a quick and easy solution at the time. But after just one winter, they started peeling up around the edges, especially on the windows that get direct sunlight. Ended up pulling them off completely and redoing everything with silicone. Sure, it was messy and took me half a Saturday afternoon, but it's been rock solid ever since. Honestly, I'd rather deal with the hassle once than keep patching things up every year or two...
Did you find the silicone tricky to apply evenly? I've been debating between the two options myself, and honestly, the idea of silicone getting everywhere makes me hesitate a bit. Those caulk strips seemed tempting because they look so neat and tidy in the package, but your experience makes me reconsider. Did you use any special tools or tricks to keep the silicone from turning into a total mess? I'm all for doing it once and doing it right, but I'd rather not spend the next week scraping dried silicone off my windows...