I've had mixed luck with PTFE spray myself. Tried it on some older wooden sash windows last year, and it was great at first—smooth as butter. But after a few months of rain and humidity swings, it seemed to wear off quicker than I expected. Ended up going back to good old-fashioned beeswax rubbed along the tracks. It's a bit messier, but honestly, it's held up surprisingly well through all seasons so far. Guess sometimes the simplest solutions still work best...
I've had decent luck using candle wax too—just grab an old candle stub, rub it along the tracks, and give it a few slides to smooth things out. Quick, cheap, and surprisingly effective even in humid weather. Beats messing around with sprays every couple months...
- Totally agree on the candle wax trick—been doing that for years, works like a charm.
- Another thing that's worked well for me is bar soap. Just rub a dry bar along the tracks; it glides smoothly and doesn't attract dirt or grime like some sprays do.
- Learned this one from my dad when we were fixing up an old house. He swore by Ivory soap, but honestly, any brand seems fine.
- Plus, soap's always handy around the house anyway, so no extra trips to the store.
- Only downside I've noticed: in super hot weather, soap can get a bit soft and sticky. Candle wax probably wins there...
- Still, both methods beat sprays hands down. No fumes, no mess, and easy to reapply whenever needed.
Soap and wax are decent quick fixes, but honestly, for long-term smoothness, silicone lubricant is the way to go. Just a thin coat—no dirt attraction, no stickiness in heat, and lasts way longer between applications. Worth trying if you haven't yet.
Interesting... silicone sounds promising, but doesn't it sometimes leave residue or marks on the glass? Just moved into my first home, and I've been trying a bunch of DIY solutions lately. I used silicone spray once on a sliding door track—it was smooth alright, but cleaning up overspray wasn't exactly fun. Maybe applying it carefully helps? Curious if you've had any issues with cleanup or discoloration over time.
I've had mixed experiences with silicone sprays too. They're great initially, but like you said, overspray can be a pain. Honestly, I've switched to using dry graphite lubricant for window tracks and sliding doors. It's cleaner, doesn't attract dirt, and no residue issues on glass. Just gotta be careful applying it—graphite dust can get messy if you're not careful. But overall, cleanup's way easier than silicone in my experience... might be worth giving it a shot next time you're tackling windows or doors.
"Honestly, I've switched to using dry graphite lubricant for window tracks and sliding doors. It's cleaner, doesn't attract dirt, and no residue issues on glass."
Totally agree with you on graphite—been using it myself for years. Silicone sprays always seemed promising at first, but the overspray and residue drove me nuts. Graphite's definitely cleaner, but like you mentioned, the dust can be tricky.
One thing I'd add from experience: before applying graphite, take a minute to prep the tracks properly. Here's what I usually do:
1. Vacuum out any loose dirt or debris first—graphite sticks better to clean surfaces.
2. Wipe down the tracks with a damp cloth or mild cleaner if they're really grimy. Let them dry completely.
3. Apply graphite sparingly—just a little goes a long way. I usually puff it lightly into the track and then slide the window or door back and forth a few times to distribute evenly.
4. Afterward, wipe away any excess graphite dust with a dry cloth or paper towel to avoid smudging your hands or clothes later.
Also, quick heads-up: graphite can stain carpets or fabrics pretty easily if you're not careful (learned that one the hard way...). So maybe put down an old towel or newspaper underneath if you're working indoors.
Another tip I've found helpful is using paraffin wax sticks for wooden window frames or older sliding doors that tend to stick. Just rub the wax lightly along the edges where friction occurs—it smooths things out nicely without attracting dirt.
Anyway, graphite's definitely my go-to now for metal tracks and sliders—way less hassle overall than silicone sprays in my book.
Good tips on graphite, especially the heads-up about staining carpets—I learned that lesson too, unfortunately. 😅
Couple more quick hacks I've picked up over the years:
- If graphite dust bugs you, try applying it with a small paintbrush instead of puffing directly from the tube. Way less messy.
- For vinyl window tracks, a little silicone paste (not spray!) works wonders. Dab it sparingly on a rag and wipe the track—no overspray, no mess.
- On older aluminum sliders, I've had luck lightly sanding rough spots with fine steel wool before lubing. Makes a huge difference in smoothness.
Paraffin wax is great for wood, but I've also used plain old candle wax in a pinch. Just rub it along the sticking edges—cheap and effective.
Anyway, graphite's still my favorite overall, but these little tweaks have saved me some headaches over the years.
Graphite's solid, but honestly I stopped using silicone paste on vinyl tracks. Found it attracted dirt over time, making things gunky. Dry PTFE (Teflon) spray worked better for me—cleaner and smoother in the long run.
Dry PTFE spray's definitely a solid suggestion, but I've also had good luck using just a bit of candle wax rubbed along the tracks. It's cheap, easy, and doesn't attract dirt or grime over time like silicone does. Just rub it lightly along the vinyl edges, move the window up and down a few times to spread it evenly, and you're good to go. Worked wonders for some stubborn windows in my old place—might be worth a shot if you're looking for another simple fix.